JLM Systems, Ltd.

This
new and innovative breather assembly replaces the conventional filler/breathers
used on hydraulic reservoirs and industrial storage tanks. A companion
FILLorDRAIN screws directly into the 2" pipe bung on a standard oil drum.

Without
ever removing the highly efficient air filter, both filling and draining are
done through the same inlet/outlet port, while air enters or exits through the
replaceable air filter.

The
results are a fluid transfer procedure that is contamination free, the
elimination of aeration and turbulence, and a cost effective maintenance
program that is easy to implement.

In
our newest version of the OILMISER™ FILLORDRAIN™ we added an integral sampling
port.

Now
the lubrication specialist, can draw a reliable oil sample without opening the
reservoir, and without removing the air filter element.

With
consistent and contamination free oil samples, comes a new level new confidence
in "condition-based" oil changes.

The
external 1/4" NPT pipe port connects to a 15 inch sampling tube extending
directly into the reservoir. Special "pipe clips" insure the position
of the sampling tube in the reservoir.

Like
the original FILLorDRAIN, it's a simple and cost effective retrofit on most
existing reservoirs.